HP ProLiant DL580 G3 Server - Manual (Page 74)

74 HP ProLiant DL580 Generation 3 Server User Guide
1.
Power down the server ("Powering down the server" on page
37 ).
2.
Extend the server from the rack, if applicable ("Extending the server from the
rack" on page 38 ).
3.
Remove the access panel ("Removing the access panel" on page
40 ).
4.
Remove the system cage ("Removing the system cage" on page
42 ).
IMPORTANT: The BBWC cable is wound around the battery pack.
Unwind the cable to the appropriate length before installing the battery
pack assembly into the server.
5.
Install the battery pack assembly into the server.
6.
Route the cable along the system board.
7.
Locate the cache module socket.