HP ProLiant DL580 G3 Server - Manual (Page 94)

94 HP ProLiant DL580 Generation 3 Server User Guide
For information about iLO technology, refer to "Integrated Lights-Out
Technology (on page
132 )."
To install the RILOE II board:
IMPORTANT: Install the RILOE II board into slot 7 for ease of
cabling.
1.
Power down the server ("Powering down the server" on page
37 ).
2.
Remove the access panel ("Removing the access panel" on page
40 ).
3.
Install the RILOE II board into slot 7.
4.
Connect the RILOE II cable ("RILOE II cabling" on page
117 ) to the 30-pin
connector on the system board.
5.
Connect the RILOE II cable to the RILOE II board.