HP ProLiant DL580 G3 Server - Manual (Page 41)

Server operations 41
3.
Lift up on the hood latch, and remove the access panel.
4.
After installing hardware options, replace the access panel. Be sure that the
panel is securely locked into place before powering up the server.
Replacing hot-plug fans
The server supports redundant hot-plug fans ("Fan locations" on page 32 ) to
provide proper airflow to the server if a primary fan fails.
WARNING: To prevent personal injury from hazardous
energy:
• Remove watches, rings, or other metal objects.
• Use tools with insulated handles.
• Do not place tools or metal parts on top of batteries.
IMPORTANT: Remove and replace one fan at a time. If the
system detects two fan failures in the same zone, the server shuts down
to avoid thermal damage.
1.
Extend the server from the rack, if applicable ("Extending the server from the
rack" on page 38 ).
2.
Remove the access panel ("Removing the access panel" on page
40 ).
3.
Remove the malfunctioning hot-plug fan from the server.