HP Photosmart C4344 All-in-One Printer - Manual (Page 209)

1 Telephone wall jack
2 Use the phone cord supplied in the box with the product
2. After you have connected the phone cord to the port labeled 1-LINE, run the fax
test again to make sure it passes and the product is ready for faxing.
3. Try to send or receive a test fax.
The "Using Correct Type of Phone Cord with Fax" test failed
Solution:
• Make sure you used the phone cord supplied in the box with the product to
connect to the telephone wall jack. One end of the phone cord should be
connected to the port labeled 1-LINE on the back of the product and the other
end to your telephone wall jack, as shown below.
1 Telephone wall jack
2 Phone cord supplied in the box with the product
Chapter 14
206 Troubleshooting
T
roub
les
hoot
ing