HP StorageWorks 2300 Disk System - Manual (Page 91)

Configuration 91
Co
nfi
gur
at
io
n
Updating Firmware (HP-Qualified Only)
Obtain the latest disk or BCC firmware release from the support site
before traveling to the customer site.
For specific information about updating firmware, see the HP
CommandView SDM Disk System Installation and User Guide, Version
1.04.
For specific information about updating firmware using HP TopTools
5.5, see the HP TopTools 5.5 User Guide.
Command View SDM
This configuration tool is supported on three different operating
systems:
■ HP-UX
■ Windows
■ Linux Redhat
Installation varies depending on the chosen operating system. After
installation, Command View SDM operation is virtually identical for all
three operating systems.
The Command View SDM software provides both server and client
applications. If you are operating as a client (on a host not directly
connected to the array), you must be assigned access permission to the
array from the server (host directly connected to the array) to access the
array for Command View SDM management.
Note Examples in this section occasionally identify a path.
When only one path is shown, either Windows path
separators “\” or UNIX/Linux path separators “/” will be
used. If you use an example, use the path separators
appropriate for your operating system.