Step 7: install disk modules, Step 7: install disk modules 78, Figure 46 – HP StorageWorks 2300 Disk System User Manual

Page 78: Disk module installation 78

Text mode
Original mode

Installation

Step 7: Install Disk Modules

Caution

Touching exposed areas on the disk can cause electrical discharge
and disable the disk. Be sure you are grounded and be careful not
to touch exposed circuits.

Disk modules are fragile and ESD sensitive. Dropping one end of the disk just
two inches is enough to cause permanent damage. In addition, static electricity
can destroy the magnetic properties of recording surfaces. Grip disks only by
their handles (A in

Figure 46

) and carriers (D), and follow strict ESD procedures.