HP XP P9500 Storage - Manual (Page 46)

•
The system's serial number, LDKC number, controller ID, Path Gr. ID, and port number will be
required during this procedure.
•
Logical path settings are required in order to perform Continuous Access Journal pair operations
and check pair status in Remote Web Console. Make sure to complete the procedure. If you
cancel logical path settings, you will be unable to perform operations and check status.
Also, operations involving logical paths cannot be performed when changing the microcode.
Make sure the microcode change completes before performing operations involving logical
paths.
Procedure 2 To set up Cnt Ac-J, define logical paths
1. In the Remote Web Console main window, select Actions > Remote Copy > Continuous Access
Journal > DKC Operation.
2. In the DKC Operation window, click to change the mode from View to Modify.
3. In the Display box, select DKC.
4. In the remote system list on the right-side, right-click and select DKC Operation > Add DKC.
46 Configuration operations