Operations in history window – HP XP P9500 Storage User Manual
Page 184
Description
Item
•
VOL: The volume manipulated during the operation. This volume is located in the local system.
This number indicates LDKC:CU:LDEV (the LDKC number, the CU number, and the LDEV
number). A volume ending in # (e.g., 00:00:3C #) indicates the LDEV is an external volume.
For details, see the HP XP P9000 External Storage for Open and Mainframe Systems User
Guide. A volume ending in X (e.g., 00:00:3C X) indicates the LDEV is a Thin Provisioning
virtual volume.
•
Paired VOL: The volume paired with the manipulated volume. This volume is located in the
remote system. This number indicates LDKC:CU:LDEV (the LDKC number, the CU number,
and the LDEV number).
•
Copy Time: The time taken for the operation (from the start of the operation to the end).
Displayed only for Paircreate Complete and Pairresync Complete operations.
Related Topics
•
Information about field behavior is shown in
“History window notes” (page 185)
•
Descriptions of the pair operations seen in the window are provided in
.
Operations in History window
Copy operations have a beginning and end. These parts of the overall operations are detailed in
the History window, and described here.
Description
Operation Displayed
A pair was defined.
Pair definition
Creation of the pair was started.
Paircreate Start
Creation of the pair was finished.
Paircreate Complete
Restoring of the pair was started.
Pairresync Start
Restoring of the pair was finished.
Pairresync Complete
Splitting (Suspending) of the pair was started.
Pairsplit-r Start
Splitting (Suspending) of the pair was finished.
Pairsplit-r Complete
The pair was split (suspended) because of a failure.
Pairsplit-r(Failure)
Release of the pair was started.
Pairsplit-S Start
Release of the pair was finished.
Pairsplit-S Complete
The status of the pair was changed from SMPL to COPY
because of an operation from the primary system.
Status Change by MCU(SMPL to COPY)
The status of the pair was changed from SMPL to PAIR
because of an operation from the primary system.
Status Change by MCU(SMPL to PAIR)
The status of the pair was changed from COPY to PAIR
because of an operation from the primary system.
Status Change by MCU(COPY to PAIR)
The status of the pair was changed from COPY to PSUS
or PSUE because of an operation from the primary system.
Status Change by MCU(COPY to PSUS/PSUE)
The status of the pair was changed from PAIR to PSUS or
PSUE because of an operation from the primary system.
Status Change by MCU(PAIR to PSUS/PSUE)
The status of the pair was changed from PAIR to SMPL
because of an operation from the primary system.
Status Change by MCU(PAIR to SMPL)
The status of the pair was changed from COPY to SMPL
because of an operation from the primary system.
Status Change by MCU(COPY to SMPL)
184 GUI reference