Pairsplit-s dialog box – HP XP P9500 Storage User Manual
Page 173
Description
Item
Indicates the followings about a remote system.
DKC
•
The serial number with the LDKC number.
•
The controller ID with the model name.
•
ID (Path Gr. ID)
•
The path type.
Indicates the processing after recovery of the pairs.
Resync Mode
•
Normal: Split pair whose status is PSUS or PSUE is recovered.
•
Delta: Delta resync operation is performed.
•
Return to standby: The status of pairs is recovered from HLDE to HOLD.
The options for splitting pairs when a failure occurs.
Error Level
•
Mirror: If a failure occurs with a pair, all pairs in the mirror where the pair belongs are
split.
•
LU: If a failure occurs with a pair, only the pair is split.
If Range is Mirror, Error Level cannot be changed.
Applies the settings to the Preview list in the Pair Operation window.
Set
Discards the settings and closes the dialog box.
Cancel
Pairsplit-S dialog box
Use this dialog box to delete a pair.
See
for complete information.
Description
Item
The release range. The default is LU if two or more pairs in the same mirror are selected.
Otherwise, the default is Mirror.
Range
•
LU: Only the specified pairs are resynchronized.
•
Mirror: All pairs in the same mirror as the selected pair are deleted.
The options for releasing pairs.
Delete Mode
•
Force: The pairs are forcibly be released even if the primary system cannot communicate with
the secondary system.
If Force is specified when pair status is other than SMPL, Range is automatically reset to Mirror.
•
Normal: The pairs are released only if the primary system can change the status of both P-VOLs
and S-VOLs to SMPL.
The default is Force if pair status is SMPL or Deleting. Otherwise, the default is Normal
Applies the settings to the Preview list in the Pair Operation window.
Set
Discards the settings and closes the dialog box.
Cancel
Pair Operation window
173