HP XP P9500 Storage - Manual (Page 33)

Table 2 System option modes (continued)
Description Mode
Mode 908 ON: Difference in CM allocation capacity among MPBs with different
workloads is large.
Mode 908 OFF (default): Difference in CM allocation capacity among MPBs with
different workloads is small.
Notes:
1. Apply this SOM to CLPRs used only for Cnt Ac-J JNLGs.
2. Since CM capacity allocated to MPBs with low workload is small, the performance
is affected by a sudden increase in workload.
3. This SOM is effective for a CLPR. Therefore, when setting this SOM to ON/OFF,
select target "LPRXX (XX=00 to 31)". For example, even when CLPR0 is defined
(CLPR1 to 31 are not defined), select "LPR00" first and then set the SOM to ON/OFF.
Guidelines for preparing systems for Cnt Ac-J 33