HP XP P9500 Storage - Manual (Page 166)

Description Item
volumes exceeds the number of rows, click Previous or Next to view information about volumes that do
not appear in the list. You can also use the vertical and horizontal scroll bars to view more information.
• VOL: Identifies the volumes in the local system. See the figures at the end of this table for an illustration
with identifying callouts.
◦
A device ID ending in # (e.g., 00:00:3C #), indicates the LDEV is an external volume. For details
on an external volume, see the HP XP P9000 External Storage for Open and Mainframe Systems
User Guide.
◦
A device ID ending in X (e.g., 00:00:3C X) indicates the LDEV is a Thin Provisioning virtual volume.
◦
A XP24000/XP20000 Disk Array volume displays “00” for the LDKC.
To the right of the icon appears information about an LU path (illustration at the end of this table),
which is a path from hosts to the volume.
The icons are:
Not paired with any other volume; neither a P-VOL nor an S-VOL.
P-VOL
S-VOL
•
Status: Pair status. For definitions, see “Pair status definitions” (page 66) .
•
JNL-MirrorID: A journal number and a mirror ID. The number on the left of the hyphen (-) is a journal
number. The number on the right of the hyphen is a mirror ID. A journal number ending in [M] indicates
the journal can be used in a 3 Cnt Ac-J DC configuration; for example, 001 [M]-00.This column is
blank if the volume in the local system is neither a P-VOL nor an S-VOL.
•
S/N (LDKC): The serial number and the LDKC number of the remote system. This column is blank if
the volume of local system is neither a P-VOL nor an S-VOL. This column can be blank while the pair
is in transition to the SMPL status. To view the latest information in this column, refresh the screen.
•
ID: Path group ID registered at DKC registration. The ID displays with "*" and 2-digit hexadecimal
notation (01 to FF) or "Default”.
• CTRLID (Model Name): The serial number and the controller ID of the remote system. The model name
is enclosed by parentheses. Note the following controller IDs: P9500 = 6. XP24000/XP20000 Disk
Array = 5, XP12000 Disk Array/XP10000 Disk Array = 4. The column is blank if the attribute of the
mirror is Initial
166 GUI reference