HP Insight Management Agents - Manual (Page 124)

•
Duplex—Displays if the controller is in half duplex, full duplex or does not support a duplex
state.
•
Link Status—Displays Remote Insight/Integrated Lights-Out Network Interface Controller
condition. The following values are possible:
◦ Other
◦ Ok
◦ Degraded
◦ Failed
•
Speed—Displays the speed of the NIC.
•
Max Packet Size—Displays the maximum packet size of the NIC.
•
Transmit/Receive Statistics—Displays the following set of statistics for the NIC:
•
Bytes—Displays the number of bytes transmitted/received.
•
Total Packets—Displays the number of packets transmitted/received.
•
Unicast Packets—Displays the number of unicast packets transmitted/received.
•
Non-Unicast Packets—Displays the number of non-unicast packets transmitted/received.
•
Discarded Packets—Displays the number of packets discarded during transmit/receive.
•
Error Packets—Displays the number of error packets found during transmit/receive.
•
Unknown Protocols—Displays the number of unknown protocol packets received.
•
Queue Length—Displays the number of outstanding packets in the transmit queue.
Integrated Lights Out
•
Model—Displays the edition of the iLO in the server.
•
Hardware Version—Displays the Hardware revision of iLO model on the server.
•
Serial Number—Displays the iLO serial number.
•
Firmware Version—Displays the iLO firmware version and date.
•
Active License Type—Displays the activated iLO license type.
•
License Key—Displays the activated iLO license key.
•
iLO Security Override Switch—Displays the Integrated Lights-Out security state. The iLO
Security Override Switch field is supported only in case of Integrated Lights-Out models.
•
Mouse—Displays whether the mouse is connected to Remote Insight Board. The Mouse field
is not supported for Remote Insight Lights-Out models.
•
Keyboard—Displays whether the keyboard is connected to Remote Insight Board. The
Keyboard field is not displayed for Remote Insight Lights-Out models.
•
Interface Status—Displays the iLO interface status.
Alarm
If your system supports Remote Insight Lights-Out Edition, the following alerts are available:
•
Status—Indicates if alerts are enabled at the iLO. This is a global flag and governs all users.
If alerts are disabled, alarms are not sent.
•
Pending Alarm—Displays if the alert is unable to determine the state of the iLO, or if all alerts
have been delivered or if there are alerts pending that still need to be sent.
124 Agent information