HP Insight Management Agents - Manual (Page 123)

Processors
The following information about each processor in the system is available in this window. This
information may vary depending on device type.
•
Processor—Lists the type of processor and its speed. For devices, the colored ball indicates
the status of each processor.
•
Co-processor—Displays the type and speed of the coprocessor on the device or client PC,
such as 80387 at 33 MHz, or W 3167 at 33 MHz.
•
Slot—Lists the number of the slot where the processor is installed. Use this information for
identification purposes.
•
Slot 0—Indicates that a CPU or a memory module is connected directly to the system board
and not in an expansion board.
•
Socket—Displays the currently selected processor’s socket. Use this information for identification
purposes.
•
Cache—Displays the amount of device or client hardware cache available. For example,
Cache L2: 64KB indicates 64 KB of secondary level cache between the processor and system
memory.
•
Action—Indicates what action, if any, should be taken for the currently selected processor.
Possible values include No Action Needed and Replace CPU.
•
Step—Displays the revision level of the processor.
•
Cores—Indicates the number of cores present in this processor
•
Threads—Indicates the number of threads present in this processor
•
Hyper-Thread—Indicates whether hyper-threading is enabled or disabled. When
Hyper-Threading is enabled, a single processor acts as two logical processors and the OS
views it as two processors.
PCI Devices
This section displays a list of expansion boards and their associated slot numbers. You can also
view System Resources that are used by each board. Use the Expansion Boards feature to keep
track of boards on the device and which resources are being used.
The Expansion Boards section provides additional information about PCI slots in the system, such
as the width and speed of the PCI slot.
Management Processor
Integrated Lights-Out (iLO) NIC
The NIC section displays the following information about the NIC in the iLO. Not all fields are
supported by all models of Remote Insight Board and/or NIC.
•
Model—Displays the NIC model.
•
DNS Name—Displays the fully qualified DNS name assigned to this iLO.
•
Type—Displays if the NIC is embedded or pcmcia and whether it is Ethernet or a token ring.
•
IP Address—Displays the IP address for this NIC.
•
Subnet Mask displays the subnet mask for this NIC.
•
Gateway—Displays the default gateway configured for this NIC.
•
Status—Displays if this NIC is enabled or disabled.
•
Physical Address—Displays the MAC address for this NIC.
Sub-system Classification 123