HP Insight Management Agents - Manual (Page 121)

◦ CPU Number—This displays the CPU number to which the memory DIMMs are installed.
◦ Riser Number—This displays the riser number to which the memory DIMMs are installed.
•
Status—This provides the current status of the Advanced Memory Protection memory board
or cartridge or riser. The following status values are supported:
◦ Unknown—The value is unsupported or could not be determined.
◦ OK—The board or cartridge is configured and operating correctly.
◦ Correctable Memory Error—The board or cartridge has at least one DIMM ECC error.
◦ Unlock Error—The board or cartridge is unlocked when it should not be. Be sure that the
board of cartridge is locked.
◦ Configuration Error—The board or cartridge has a bad memory configuration. Be sure
that all memory modules are of the correct type, speed, latency, etc.
◦ Bus Error—The board or cartridge has a memory bus error. Please insure all memory
modules are of the correct type, speed, latency, etc. Be sure that the cartridge is inserted
properly.
◦ Power Error—The board or cartridge has power error. Please insure all memory modules
are of the correct type, speed, latency, etc. Also insure the cartridge is inserted properly.
◦ Advanced ECC—The board or cartridge is configured for advanced ECC mode.
◦ Online Spare—The board or cartridge is configured for Online Spare mode.
◦ Mirrored—The board or cartridge is configured for mirrored mode.
◦ Uncorrectable Memory Error—The board or cartridge has a mirrored/RAID DIMM error.
◦ Memory RAID—The board or cartridge is configured for memory RAID mode.
◦ LockStep—The board or cartridge is configured for LockStep mode.
◦ Uncorrectable LockStep Memory Error—The board or cartridge has a LockStep DIMM
error.
•
Present—This value specifies existence of the board or cartridge or riser in the Slot/CPU
number.
•
Locked—This value specifies whether the board or cartridge or riser is locked or not.
•
Hot Plug—This value specifies whether the board or cartridge or riser is hot pluggable or not.
•
Total Memory—This value specifies the size of memory for this board or cartridge or riser,
including memory seen by the OS and the memory used for spare, mirrored, RAID-XOR, or
LockStep configurations.
•
In Use by OS—This value specifies the size of memory for this board or cartridge or riser as
seen by the OS.
•
Operating Frequency—This value specifies the operational memory frequency in MHz for this
board, Cartridge, or riser.
•
Operating Voltage—This value specifies the operational memory voltage in millivolts for this
board, Cartridge, or riser.
Sub-system Classification 121