HP XP Racks - Manual (Page 90)

IBM DS3000/DS4000/DS5000 series
The port must be configured as a target attached to a Windows host.
Set system parameters according to the following table. For connection parameters not shown,
refer to IBM DS3000/DS4000/DS5000 series documentation.
Parameter Setting Parameter
When alternate paths are connected to different clusters on the
DS3000/DS4000/DS5000 series side: Linux host type
IBM V7000 series
Set system parameters according to the following table. For connection parameters not shown,
refer to the IBM V7000 series documentation.
Table 2 System parameters for connecting IBM V7000 series
Parameter setting Parameter
Generic host type
The model name of the IBM V7000 series is displayed as "SVC" on the Remote Web Console
window.
IBM SVC series
The port must be configured as a target attached to a Windows host.
Set system parameters according to the following table. For connection parameters not shown,
refer to IBM SVC series documentation.
Parameter Setting Parameter
Generic host type
IBM XIV series
The port must be configured as a target attached to a Windows host.
Device serial number differs between IBM XIV series and HP XP7 Storage, as shown in the following
table.
Display in IBM XIV Display in HP XP7 Storage
Type Item Type Item
Decimal value First 2 digits of (System) Serial
number Decimal value First 2 digits of Serial Number
Decimal value Last 5 digits of (System) Serial
number Hexadecimal value Last 5 digits of Serial Number
Decimal value Device serial number Hexadecimal value Characteristic 1
Fujitsu FibreCAT CX series
The port must be configured as a target attached to a Windows host.
90 Supported external storage systems