HP XP Racks - Manual (Page 126)

Edit External WWNs window
Description Item
Number of Read/Write commands that can be queued to the external
volume. The numbers 2 through 128 can be entered. When two or more
external paths with different values are selected, the field is blank. QDepth
Number of seconds that should pass before I/O to the external volume
times out. The numbers 5 through 240 can be entered. When two or more
external paths with different values are selected, the field is blank. I/O Timeout (sec.)
Time that elapses from the time that a path goes down to the time when the
external volume is blocked. The numbers 5 through 180 can be entered. Path Blockade Watch (sec.)
When two or more external paths with different values are selected, the
field is blank.
CAUTION: If you want to change multiple parameters for an external WWN more than once,
wait until the currently applied task finishes, and then perform the next setting change.
If you perform the setting change for the next task before the currently applied task finishes, the
setting is only applied to the next task. The result might be different from what you expected.
126 External Storage GUI reference