HP XP Racks - Manual (Page 84)

Identifying the HUS/AMS/WMS model using the serial number
When the external storage system is HUS, AMS, or WMS, you can identify the storage system
model from the serial number displayed in the Serial Number column in the Volume Operation
window.
The following table describes the relationship between the number in the Serial Number column
and the storage system model.
Model Displayed Serial Number Storage System
HUS 150 95XXXXX HUS
HUS 130 93XXXXX
HUS 110 91XXXXX
AMS 2500 87XXXXXX AMS
AMS 2300 85XXXXXX
AMS 2100, AMS 2010 83XXXXXX
AMS 1000 77XXXXXX
AMS 500 75XXXXXX
AMS 200 73XXXXXX
WMS 100 71XXXXXX WMS
In serial numbers, "X" is an arbitrary number or character.
When the model of HUS/AMS/WMS storage system is changed, the Serial Number is changed
as well. If the HUS/AMS/WMS storage system is used as an external storage system, the mapped
external volume may be blocked. To correct this problem, you can delete the mapping of the
external volume and remap it to use the blocked external volume. See
“Requirements for external
storage system maintenance” (page 65) for detailed information on remapping.
Identifying the controller using the port WWN (HUS/AMS/WMS)
When the external storage system is HUS, AMS, or WMS, you can identify the controller (controller
0 or controller 1) from the port WWN.
The following table describes the relationship between the port WWN and the controller.
WWN of Port Controller Model
XXXXXXXXXXXXXXX0 Controller 0 AMS 200
WMS 100
XXXXXXXXXXXXXXX1 Controller 1
XXXXXXXXXXXXXXX0 Controller 0 AMS 2100
XXXXXXXXXXXXXXX1 AMS 2010
AMS 500
XXXXXXXXXXXXXXX2 Controller 1
XXXXXXXXXXXXXXX3
XXXXXXXXXXXXXXX0 Controller 0 HUS 110
XXXXXXXXXXXXXXX1 HUS 130
XXXXXXXXXXXXXXX2 AMS 2300
XXXXXXXXXXXXXXX3 AMS 1000
XXXXXXXXXXXXXXX4 Controller 1
XXXXXXXXXXXXXXX5
84 Supported external storage systems