Rack stability – HP OpenView Storage Management Appliance and Software User Manual

Page 14

About this Guide

xiv

Any surface or area of the equipment marked with these symbols

indicates the presence of a hot surface or hot component. Contact with

this surface could result in injury.

WARNING:

To reduce the risk of injury from a hot component, allow

the surface to cool before touching.

Power supplies or systems marked with these symbols indicate

the presence of multiple sources of power.

WARNING:

To reduce the risk of injury from electrical shock,

remove all power cords to completely disconnect power from the

power supplies and systems.

Any product or assembly marked with these symbols indicates that the

component exceeds the recommended weight for one individual to

handle safely.

WARNING:

To reduce the risk of personal injury or damage to the

equipment, observe local occupational health and safety requirements

and guidelines for manually handling material.

Rack Stability

Rack stability protects personnel and equipment.

WARNING:

To reduce the risk of personal injury or damage to the

equipment, be sure that:

■

The leveling jacks are extended to the floor.

■

The full weight of the rack rests on the leveling jacks.

■

In single rack installations, the stabilizing feet are attached to the rack.

■

In multiple rack installations, the racks are coupled.

■

Only one rack component is extended at any time. A rack may become

unstable if more than one rack component is extended for any reason.