HP EML E-series Tape Libraries - Manual (Page 49)

Power distribution unit
NOTE: The EML 71e does not include a power distribution unit because you install it in your
own rack.
Figure 48 Controls and indicator on the PDU
Table 19 Controls and indicator on the PDU
Function Control/indicator Index No.
When lit (red), shows power is applied to the unit. When
not lit, indicates the PDU is not receiving power. Power LED 1
When switched On, applies power to power strip 1. PDU switch 1 2
When switched On, applies power to power strip 2. PDU switch 2 3
When set to I (On), applies power to the power strip. When
set to O (Off), removes power from the power strip. Power strip power switch 4
Controls and indicators 49