HP Storage Mirroring Software - Manual (Page 68)

66 of 195
●
Password—Specify the password associated with the user account you
entered.
●
DNS Servers—Click Add and specify the IP address of a DNS server in the
DNS domain. Repeat this for each DNS server in the DNS domain. If you
want to remove a server from the list, highlight the address and click Remove
.
●
IP addresses—For each IP address on the source, select an IP address on
the recovery server that will take over for that source IP address.
10. Once you have your DNS updates configured, click Test DNS to determine if your
DNS updates will be successful.
11. Click Next to continue.
12. Specify your recovery shutdown options.
●
Wait for user intervention before recovery—Specify if you want to pause
the recovery process after the original source image has been mirrored to the
recovery server, which allows you time to coordinate any other tasks. If you
do not pause the recovery, the original source system state will be processed
on the recovery server immediately after the mirror is complete. (The recovery
server will automatically reboot after the system state processing is
completed.)
●
Shut down the source server—Specify if you want to shutdown the source
server before the original source system state is processed on the recovery
server, which avoids identity conflicts on the network. The shutdown will
occur after the original source image is mirrored to the recovery server but
before the original source system state is applied to the recovery server. This
option is not available if the recovery server is the original source.