HP Storage Mirroring Software - Manual (Page 148)

146 of 195
4. Select Enable notification.
Note:
Any specified notification settings are retained when Enable notification
is disabled.
5. Specify your e-mail settings.
●
Mail Server (SMTP)—Specify the name of your SMTP mail server.
●
Log on to SMTP Server—If your SMTP server requires authentication,
enable Log on to SMTP Server and specify the Username and Password
to be used for authentication. Your SMTP server must support the LOGIN
authentication method to use this feature. If your server supports a different
authentication method or does not support authentication, you may need to
add the Storage Mirroring Replicate server as an authorized host for relaying
e-mail messages. This option is not necessary if you are sending exclusively
to e-mail addresses that the SMTP server is responsible for.
●
From Address—Specify the e-mail address that you want to appear in the
From field of each Storage Mirroring Replicate e-mail message. The address
is limited to 256 characters.
●
Send To—Specify the e-mail address that each Storage Mirroring Replicate
e-mail message should be sent to and click Add. The e-mail address will be
inserted into the list of addresses. Each address is limited to 256 characters.
You can add up to 256 e-mail addresses. If you want to remove an address
from the list, highlight the address and click Remove. You can also select
multiple addresses to remove by Ctrl-clicking.
●
Subject Prefix and Add event description to subject—The subject of each
e-mail notification will be in the format Subject Prefix : Server Name :
Message Severity : Message ID : Message Description. The first and last
components (Subject Prefix and Message Description) are optional. The
subject line is limited to 150 characters.
If desired, enter unique text for the Subject Prefix which will be inserted at
the front of the subject line for each Storage Mirroring Replicate e-mail
message. This will help distinguish Storage Mirroring Replicate messages
from other messages. This field is optional.
If desired, enable Add event description to subject to have the description
of the message appended to the end of the subject line. This field is optional.
●
Filter Contents—Specify which messages that you want to be sent via e-
mail. Specify Information, Warning, and/or Error. You can also specify
which messages to exclude based on the message ID. Enter the message
IDs as a comma or semicolon separated list. You can indicate ranges within
the list.