HP Storage Mirroring Software - Manual (Page 67)

65 of 195
●
LAN recovery—If your recovery server is on a LAN with your original
source, the original source name and the IP address(es) will be applied to
the recovery server. Specify which network adapters on the recovery server
that you want to take over for the network adapters on the original source.
●
WAN recovery—If your recovery server is located across a WAN from your
original source, the original source name will be applied to the recovery
server, but the IP address(es) of the original source will not be used. Instead,
the IP address(es) of the recovery server will be used. If desired, you can
select to Update DNS servers, which will allow you to specify how to
resolve server names and IP addresses. If you do not select Update DNS
Servers, you must manually modify DNS after the recovery is complete.
8. Click Next to continue.
9. If you selected to update your DNS servers for a WAN recovery type, specify your
DNS update options.
●
DNS Domains—Click Add and specify the name of your DNS Domain.
Repeat this for each DNS domain. If you want to remove a domain in the list,
highlight the name and click Remove.
●
User name—Highlight a DNS domain and specify a user account that has
privileges to update DNS.