General media specifications – HP LaserJet M4345 Multifunction Printer series User Manual
Page 78
●
Do not use any media that produces hazardous emissions, or that melts, offsets, or discolors
when exposed to the temperature of the fuser.
●
Do not use paper that is embossed or coated, or any media that is not designed to withstand
the fusing temperature of the device. Do not use letterhead paper or preprinted forms that are
made with dyes or inks that cannot withstand the heat of the fuser.
To order HP LaserJet printing supplies, see
Order parts, accessories, and supplies
General media specifications
For complete paper specifications for all HP LaserJet devices, see the HP LaserJet Printer Family
Print Media Guide (available at
) .
Category
Specifications
Acid content
5.5 pH to 8.0 pH
Caliper
0.094 to 0.18 mm (3.0 to 7.0 mils)
Curl in ream
Flat within 5 mm (0.02 in)
Cut edge conditions
Cut with sharp blades with no visible fray.
Fusing compatibility
Must not scorch, melt, offset, or release hazardous emissions when heated to 200°
C (392°F) for 0.1 second.
Grain
Long grain
Moisture content
4% to 6% by weight
Smoothness
100 to 250 Sheffield
66
Chapter 4 Media and trays
ENWW