HP LaserJet M4345 Multifunction Printer series - Manual (Page 37)

Default Fax Options
Table 2-4 Fax Send menu
Menu item Sub-menu item Values Description
Resolution Standard (100x200dpi)
(default)
Fine (200x200dpi)
Superfine (300x300dpi)
Use this feature to set the resolution for sent
documents. Higher resolution images have more
dots per inch (dpi), so they show more detail. Lower
resolution images have fewer dots per inch and
show less detail, but the file size is smaller.
Image Adjustment Background Cleanup Adjust the value within
the range. Increase the Background Cleanup setting to remove
faint images from the background or to remove a
light background color.
Sharpness Adjust the value within
the range. Adjust the Sharpness setting to clarify or soften the
image.
Fax Header Prepend
Overlay
Use this feature to select the position of the fax
header on the page.
Select Prepend to print the fax header above the fax
content and move the fax content down on the page.
Select
Overlay to print the fax header over the top of
the fax content without moving the fax content down.
Using this option could prevent a single-page fax
from flowing onto another page.
Table 2-5 Fax Receive menu
Menu item Values Description
Forward Fax Fax Forwarding
Change PIN
To forward received faxes to another fax device, select Fax
Forwarding and Custom . You can then type the number of the
other fax device into the Fax Forwarding Number field. When you
select this menu item for the fist time, you are prompted to set up a
PIN. You will be prompted to enter that PIN every time you try to
use this menu. This is the same PIN that is used to access the Fax
Printing menu.
Stamp Received Faxes Enabled
Disabled (default)
Use this option to add the date, time, senders phone number, and
page number to each page of the faxes that this device receives.
Fit to Page Enabled
Disabled
Use this feature to shrink faxes that are larger than Letter-size or
A4-size so that they can fit onto a Letter-size or A4-size page. If it
this feature set to
Disabled , faxes larger than Letter or A4 will be
flow across multiple pages.
Fax Paper Tray Select from the list of trays. Select the tray that holds the size and type of paper that you want
to use for incoming faxes.
Output Bin Select the default output bin, if applicable, to use for faxes.
ENWW Default Job Options menu 25