HP LaserJet M4345 Multifunction Printer series User Manual
Page 107

3.
Touch
Default Copy Options
.
4.
Touch
Staple/Collate
.
5.
Touch
Staple
.
6.
Touch the staple option you want to use.
NOTE
Selecting the stapler at the printer control panel changes the default setting to
Staple
.
It is possible that all print jobs will be stapled. However, settings that are changed in the
printer driver override settings that are changed at the control panel.
Select the stapler in the printer driver for printed jobs (Windows)
NOTE
The following procedure changes the default setting to staple all print jobs.
1.
Open the printer driver. See
. Look for the column with the heading "To
change the print job default settings."
2.
On the Output tab, click the drop-down list under Staple, and click One Staple Angled.
NOTE
You can create a Quick Set that has the appropriate settings.
Select the stapler in the printer driver for printed jobs (Mac)
Select the stapler by creating a new preset in the printer driver.
1.
Open the printer driver. See
. Look for the column with the heading "To
change the print job default settings," and follow the instructions for the operating system that
you are using.
2.
Create the new preset.
Set the stapler at the control panel for all copy jobs
NOTE
The following procedure changes the default setting for all copy jobs.
1.
Scroll to and touch
Administration
.
2.
Touch
Default Job Options
.
3.
Touch
Default Copy Options
.
4.
Touch
Staple/Collate
.
5.
Touch
Staple
.
6.
Touch the staple option you want to use.
ENWW
Use the stapler
95