HP OneView for Microsoft System Center - Manual (Page 65)

Alerts
The following table provides the details on the alerts available in the management packs.
HP BladeSystem
Management Pack HP OneView Enclosure
Management Pack Summary Event ID
A rack enclosure has overheated. 22005
A rack enclosure is overheating. 22006
A rack power supply has failed. 22013
A rack power supply has degraded. 22014
A rack power subsystem is not redundant. 22018
A rack power subsystem input has a voltage
problem. 22019
A server blade group has a capper error. 22055
A rack power subsystem is overloaded. 22020
An Onboard Administrator has degraded. 22037
A rack enclosure fan has failed. 22008
A rack enclosure fan has degraded. 22009
An Onboard Administrator role has changed
to Primary. 22041
A Server blade e-keying has failed. 22042
The interconnect has failed. 22046
The interconnect has degraded. 22047
A test alert has been sent. 11003
Additional information
For more information on transitioning from Virtual Connect modules to HP OneView, refer to the
whitepaper,
Transitioning a Virtual Connect Configuration to HP OneView .
Differences between HP OneView Management Packs and existing HP Management Packs 65