HP NonStop G-Series - Manual (Page 85)

Backup Process ID
The process ID of the backup I/O process. If the state of the backup I/O
process is Stopped, this will not be displayed.
Example: 1,285
Disk Pair
Disk Pair Name
The name and location of the mirrored disk.
Example: Disk $DATA00-M (1.1.2).
Firmware
Version The version of the firmware running on the disk.
Backup Path
SCSI ID An identification number assigned to the device when configured.
SCSI Controller
A number (1 or 2) that identifies the backup SCSI controller that manages
the disk.
Example: SCSI Controller (1.1.50.2)
Access State
The accessibility of the backup path.
Example: Inactive, Active
Configured Controller
Location
The location of the backup disk path SCSI controller.
Example: PMF.SAC-2.GRP-1.MOD-1.SLOT-55
Primary Path
SCSI ID An identification number assigned to the device when configured.
SCSI Controller
A number (1 or 2) that identifies the primary SCSI controller that manages
the disk.
Example: SCSI Controller (1.1.50.2)
Access State
The accessibility of the primary path.
Values: Inactive, Active
Configured Controller
Location
The location of the primary disk path SCSI controller.
Example: PMF.SAC-2.GRP-1.MOD-1.SLOT-50
Actions
Abort Backup Path
Terminates operation of the backup path to the disk. When the Abort action finishes, the path is in a