HP NonStop G-Series - Manual (Page 275)

See also multimode fiber-optic (MMF) ServerNet cable .
small computer system interface (SCSI)
An ANSI-standard protocol used by a controller for access to a device. For example, the
disk drives in NonStop S-series servers are connected on a SCSI
bus .
snapshot
A record of the condition of your NonStop server, including alarms and attribute values
of all supported resources at the time the file was saved. Snapshots are created and saved
manually using the OSM Service Connection.
SNETMON
Abbreviation for the ServerNet cluster monitor process. SETMON is a process pair
named $ZZSCL that manages the state of the ServerNet cluster subsystem. Each node
(system) in a ServerNet cluster must have one SNETMON process pair.
software configuration incident report
An incident report that notifies you of changes in the software configuration of your
NonStop server. Software configuration incident reports include the server’s software
configuration file.
See also periodic incident report and problem incident report .
source
One of two selection types for filtering OSM status messages. These category types are
supported:
SNMP OSM encountered an SNMP protocol error.
SP Interface
The OSM client or server application encountered an error while
performing an OSM operation.
System The OSM operation failed due to a system error.
User
The user specified an incorrect value for the requested operation. Check the
specified value and retry the operation.
split-star topology
A network topology that uses up to two HP NonStop Cluster Switches for each external
fabric. External routing is implemented between the two starred halves of a ServerNet
cluster. (A starred half consists of up to eight nodes attached to one set of cluster
switches.) The starred segments are joined by four-lane links. The split-star topology
supports up to 16 nodes.
See also star topology , tri-star topology , and layered topology .
star topology
A network topology in which all nodes are connected to a central hub (HP NonStop