HP NonStop G-Series - Manual (Page 180)

Physical
Part Number
The part number of the component that was assigned in manufacturing. Use
part numbers for identifying and ordering parts.
Track ID
A unique serial number that identifies the component. Track IDs are used for
tracking components.
Hardware Revision
A code that identifies the generation of the component. Hardware revision
codes are used for tracking components.
Logical
Device State The state of the component as known to the operating system on the server. Values
Actions
None.
System
A system is made up of all the hardware components, software, and firmware that are managed by a
single operating system. Internal hardware components are housed in enclosures and are arranged in
groups, modules, and slots. User-replaceable components are known as customer-replaceable units
(CRUs). Components that must be replaced by your service provider are known as field-replaceable
units (FRUs). Both CRUs and FRUs can contain subcomponents.
Location in OSM Tree: Located at the top level
Example: System \STARZ
Attributes
System
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Values
Logical
Stored Topology
The maximum processor configuration for the service processor that will be
set the next time the system or enclosure is powered on.
Values
System Type
Whether the system is a standard Commercial system or a special Telco
system.
Current Topology The maximum processor configuration for the service processor. Values