Attributes – HP NonStop G-Series User Manual
Page 139
Fast Ethernet ServerNet addressable controller (FESA SACs)
●
Gigabit Ethernet ServerNet addressable controllers (GESA SACs)
●
Common Controller ServerNet addressable controllers (CCSA SACs)
●
Token Ring ServerNet addressable controllers (TRSA SACs)
●
Location in OSM Tree: System > Group > Module > CRU > SAC > PIF
Example: TRSA PIF $ZZLAN.TRSA0.0.B
Attributes
PIF
Service State
Displayed in the Attributes tab and Attributes dialog box only if attention or service is
required.
Logical
Current Configured Speed The transmission rate for the ServerNet addressable controller.
Duplex Mode
The transmission mode for the ServerNet addressable controller.
Values: Half Duplex, Full Duplex, Unknown
Network MAC Address
The media access control (MAC) address of the PIF network.
Maximum Speed
The maximum transmission rate for the ServerNet addressable
controller.
Values: 10 megabits per second, 100 megabits per second, Unknown
Device State
The state of the component as known to the operating system on the
server.
Processors with Data Path
The processor numbers for processors that have a successful data path to
the PIF. If no processor has a path, "None" is shown.
Example: (0,1)
Hardware MAC Address
The media access control (MAC) address of the PIF hardware.
Ring State
Only for the TRSA CRU.
The current state of the Token Ring.
Values: Opened, Opening, Open Failure, Closed, Closing, Ring Failure
Ring Open Status
Only for the TRSA CRU.
Status (success or reason for failure) of the most recent attempt to enter
the Token Ring.
Values: Last Open Successful, No Open Attempted, Bad Parameter,
Lobe Failed, Signal Loss, Insertion Timeout, Ring Failure, Beaconing,
Duplicate MAC, Request Failed, Remove Received