Actions, Maintenance switch, Attributes – HP NonStop G-Series User Manual
Page 130
Actions
Abort
Terminates operation of the LIF. When the Abort action finishes, the LIF is in the Stopped state.
Delete
Deletes the LIF.
Start
Starts the LIF.
Stop
Rather than automatically stopping the LIF (as the Abort action does), this action first warns you if
the LIF is currently in use (and stops it only after you confirm).
Maintenance Switch
An Ethernet switch that allows the OSM console to communicate with the Maintenance Entity (ME)
in the
.
Location in OSM Tree: System > Monitored Service LAN Devices > Maintenance Switch
Example: Maintenance Switch SRSLAN
Attributes
Logical
Contact
Configurable contact name set in the web interface (launched by the
action) by selecting Configuration tab > System Info > System
Contact.
Device Name
Configurable identifier set in the web interface (launched by the
action) by selecting Configuration tab > System Info > System Name.
Device Status
Indicates whether the switch is up or down.
Firmware Revision The version of the firmware running on the switch.
IP Address
The IP address of the switch.
Lines Connected
Lists the port numbers of ports on the switch that have lines connected.
Lines Disconnected
Lists the port numbers of ports on the switch that have been disconnected
(since the OSM server has been running).
Location
Configurable location identifier set in the web interface (launched by the
action) by selecting Configuration tab > System Info >
System Name.