HP NonStop G-Series - Manual (Page 225)

Actions
Blink LED Off
Turns off the blinking of the fault LED.
Blink LED On
Causes the fault LED to blink to make it easier to identify the component.
Configuration Update
Loads a configuration file from the local node to the switch logic board and prompts the user to
change the numeric selector to the desired value. For details, see the ServerNet Cluster 6780
Planning and Installation Guide.
Optional Parameter: File Name— the name of the configuration file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Dump
Copies a memory image from a 6780 switch to a specified file on the local system.
Firmware Update
Loads a firmware file from the local node to the switch logic board. For details, see the
ServerNet Cluster 6780 Planning and Installation Guide.
Optional Parameter: File Name—the name of the firmware file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
FPGA Update
Loads an FPGA code file from the local node to the switch logic board. For details, see the
ServerNet Cluster 6780 Planning and Installation Guide.
Optional Parameter: File Name—the name of the FPGA code file on the local node
Syntax: $volume.subvolume
Default value: $SYSTEM.SYSnn
Hard Reset