Make sure the printer is connected firmly to a functioning alternating current (AC)
power outlet. For voltage requirements, see Electrical specifications.

Alignment fails

If the alignment process fails, make sure you have loaded unused, plain white paper
into the input tray. If you have colored paper loaded in the input tray when you align the
ink cartridges, the alignment fails.

If the alignment process fails repeatedly, you might have a defective sensor or ink
cartridge. Contact HP support. Go to www.hp.com/support. If prompted, select your
country/region, and then click Contact HP for information on calling for technical
support.

The printer is not responding (nothing prints)

There are print jobs stuck in the print queue

Open the print queue, cancel all documents, and then reboot the computer. Try to print
after the computer reboots. Refer to the Help system for the operating system for more
information.

Check the printer setup

For more information, see General troubleshooting tips and resources.

Check the HP software installation

If the printer is turned off when printing, an alert message should appear on your
computer screen; otherwise, the HP software provided with the printer might not be
installed correctly. To resolve this, uninstall the HP software completely, and then
reinstall the HP software.

Solve printing problems