HP Officejet Pro 8000 - A811 - Manual (Page 15)

• Do not overload the tray. For more information, see Load media.
• To prevent jams, poor print quality, and other printing problems, avoid loading the
following media in the trays:
ƕ Multipart forms
ƕ Media that is damaged, curled, or wrinkled
ƕ Media with cutouts or perforations
ƕ Media that is heavily textured, embossed, or does not accept ink well
ƕ Media that is too lightweight or stretches easily
ƕ Media that contains staples or clips
Load media
This section provides instructions for loading media into the printer.
This section contains the following topics:
• Load standard-size media
• Load envelopes
• Load cards and photo paper
• Load transparencies
• Load custom-size media
Load standard-size media
This section provides instructions for loading media into the printer.
NOTE: Tray 2 is sold as an accessory. For ordering information, see HP supplies
and accessories.
Use these instructions to load standard media.
To load Tray 1 (main tray)
1. Lift the output tray.
2. Slide the media guides out to the widest setting.
3. Insert the media print-side down in the center of the tray, make sure the media
does not exceed the line marking in the tray. Slide the media guides towards the
Load media 11