HP Virtual Connect Enterprise Manager Software - Manual (Page 32)

Do not configure the VC Domain using the enhanced SNMP configuration. If necessary, disable the
enhanced SNMP configuration by following these steps:
1. Do not configure more than five SNMP trap destinations.
2. Verify that all SNMP trap destinations follow these rules:
a.
The Destination Name must be in the following format:
__<0 for
VC-Enet and 1 for VC-FC>
(for example, 192.168.1.1_public_1)
b. Select the “ipv4” option.
c. Set the SNMP trap format to “SNMPv1.”
Figure 3-4 Adding or editing a compatible SNMP trap destination
d. To disable trap severities, from the Add a SNMP Trap Destination page, click Advanced, as
shown in the following figure.
Figure 3-5 Disabling trap severities
e. Trap categories must equal Other for either VC-Enet traps or VC-FC traps. Do not select both.
From the Add a SNMP Trap Destination page, click Advanced, click More, and then select
either of the following:
•
On the VC-Enet Traps box, select Other, as shown in the following figure.
•
On the VC-FC Traps box, select Other.
32 Managing VC Domains