HP ProLiant WS460c Gen8 Graphics Server Blade - Manual (Page 9)

Component identification 9
Item Description Status
power LED pressed.
Solid Amber = System is in standby; Power On/Standby button service is
initialized.
Off and the Health Status LED bar is off = The system has no power.
Off and the Health Status LED bar is flashing green = The Power On/Standby
button service is being initialized.
3 UID LED Solid Blue = Identified
Flashing Blue = Active remote management
Off = No active remote management
4 FlexibleLOM LED Green = Network linked
Flashing Green = Network activity
Off = No link or activity
5 UID LED Solid Blue = Identified
Flashing Blue = Active remote management
Off = No active remote management
6 Health status LED
bar
Solid Green = Normal (System is powered on.)
Flashing Green = Power On/Standby button service is being initialized.
Flashing Amber = Degraded condition
Flashing Red = Critical condition
Off = Normal (System is in standby.)
Hot-plug drive LED definitions
Item LED Status Definition
1 Locate Solid blue The drive is being identified by a host application.
Flashing blue The drive carrier firmware is being updated or requires an update.
2 Activity ring Rotating green Drive activity
Off No drive activity
3 Do not remove Solid white Do not remove the drive. Removing the drive causes one or more of
the logical drives to fail.
Off Removing the drive does not cause a logical drive to fail.
4
Drive status Solid green The drive is a member of one or more logical drives.
Flashing green The drive is rebuilding or performing a RAID migration, strip size
migration, capacity expansion, or logical drive extension, or is
erasing.
Flashing
amber/green
The drive is a member of one or more logical drives and predicts
the drive will fail.