HP ProLiant WS460c Gen8 Graphics Server Blade - Manual (Page 80)

Battery replacement 80
Battery replacement
If the workstation blade no longer automatically displays the correct date and time, then replace the battery
that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
• Replace only with the spare designated for this product.
To remove the component:
1. Power down the workstation blade (on page 14 ).
2. Remove the workstation blade (on page 15 ).
3. Remove the access panel (on page 16 ).
4. Remove the front panel/drive cage assembly (" Remove the front panel/hard drive cage assembly " on
page 16 ).
5. Identify the battery location (" System board components " on page 10 ).
6. Remove the battery.
IMPORTANT: Replacing the system board battery resets the system ROM to its default
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.