Install the nvidia tesla k20 or k20x graphics card – HP ProLiant WS460c Gen8 Graphics Server Blade User Manual
Page 35
Operations 35
6.
Torque the three front plate screws to 3.0~3.5 in-lbf.
IMPORTANT:
Ensure that air flow impedance control labels cover the five openings on each end
of the I/O plate. These labels control the air flow into the GRID card and balance the air flow to
adjacent blades. Using the card in the expansion blade without implementing this measure might
potentially result in unexpected host shutdown of the host blade and/or nearby blades in the
same enclosure. These labels are replaceable with any commonly available tape or label, as long
as the tape or label covers the hole as shown and has construction to withstand the air flow
without deforming or falling off when powered off. After installation, always ensure that the labels
are not removed or detached.
7.
Install the workstation blade into the enclosure.
8.
Power up the workstation blade.
9.
Download and install the latest drivers from the HP website
r NVIDIA website
For software installation information, see the Microsoft Windows on HP ProLiant WS460c Gen8
Workstation Blade with WS460c Graphics Expansion Blade Administrator Guide.
Install the NVIDIA Tesla K20 or K20X graphics card
Required tools for this procedure: