HP XP20000XP24000 Disk Array - Manual (Page 52)

Figure 15 Create V-VOL Wizard Dialog Box (2)
The Create V-VOL wizard dialog box (2) displays the following items:
• V-VOL information setting list (upper-right area of the dialog box)
Information about the V-VOL(s) that you are going to create is displayed.
• No.: number
• V-VOL Group: V-VOL group ID
• Emulation: emulation type of the V-VOL
• Capacity: capacity of the V-VOL
• LDCK:CU:LDEV: LDKC number, CU number, and LDEV number of the V-VOL
A V-VOL for XP Thin Provisioning has an LDEV number followed by X.
• Select LDKC No. drop-down list
You can select the LDKC number.
• Select CU No. drop-down list
You can select the CU number.
• Interval drop-down list
You can select the interval between the LDEV numbers that need to be assigned to the newly
created V-VOLs. If you select 0, the LDEV numbers will be sequential.
Notes:
• The value you specify as the interval between LDEV numbers counts only the available LDEV
numbers and skips those that are not selectable.
• Even when you use multiple CUs, LDEV numbers will be assigned according to the setting in
the Interval drop-down list.
• Select LDEV No. area
The settings of LDEV numbers for the CU number selected from the Select CU No. drop-down list
are displayed. The column and row headers indicate the LDEV number. For example, the LDEV
number for the cell in column +2 and row +10 is 12.
52 Performing XP Thin Provisioning Operations