HP 8.20q Fibre Channel Switch - Manual (Page 48)

48 Managing Switches
Figure 27 Switch Zoning Information dialog box
This dialog box shows the following current information about your switch:
• Zone List—Lists all zones and the members of each. The currently active zones are shown in a darker
color.
• Switch Name (Port #)—Shows the switch name and, in parentheses, the number of the switch port
that is attached to the HBA or RAID storage device.
• Port Type—Shows the type of port; for example, HBA or RAID storage.
• Vendor—Attached device manufacturer name; for example, Hewlett Packard.
2. When you finish viewing the switch zoning information, click OK to close the dialog box.
NOTE: If you have transparent routing configured with Inter-Fabric Zones (IFZs) activated (see “About
transparent routing,” page 45), the switch zoning information may appear in Simple SAN Connection
Manager ( Figure 28 ). IFZs appear as “Zone: IFZ_xxxxxxxxxxxxxxxx_xxxxxxxxxxxxxxxx,” followed by the
Port WWN of each TR_Port, host port, and storage port. If known, the Switch Name, Port Type, and
Vendor information are shown; otherwise, this information is displayed as “Unknown.”