HP 8.20q Fibre Channel Switch - Manual (Page 111)

HP StorageWorks Simple SAN Connection Manager User Guide 111
9 Managing Storage Subsystems
This chapter provides the procedures for managing your storage subsystems (storage arrays).
Viewing subsystem information
Simple SAN Connection Manager provides easy access to information about each subsystem within your
SAN.
To view information about a subsystem:
1. In the navigation pane under Storage subsystem-Logical Disk View, click the subsystem you want to
view.
The content pane (
Figure 84 ) shows the Subsystem Information.
Figure 84 Subsystem Information
The following read-only information is shown for the selected subsystem:
• Subsystem Information:
• Identifier
• Status
• Health
• Capabilities
• Total Capacity (in GB)
• Allocated (in GB)
• Available (in GB)
2. To view additional information about the selected storage subsystem, click the following tabs: