HP XP Racks - Manual (Page 39)

•
(Optional) To sort the Available LDEVs and Selected Pairs tables according to the capacity,
for Capacity, choose a capacity item by which to sort the tables.
The remaining number you have to select refers to the P-VOLs that do not have an assigned
S-VOL, as seen in the Selected Pairs table.
•
(Optional) To sort the Selected Pairs table, click Sort in the middle-left.
•
(Optional) To change the split type and the rate at which data is copied, which applies
to all new pairs, change the pair options.
For more information about changing pair options, see “Changing BC pair options”
(page 44) .
•
(Optional) To change MU numbers, do the following:
a. Select the line for the LDEV in the Selected Pairs table.
b. Click Edit Mirror Units.
c. In the Edit Mirror Units dialog box, specify the S-VOL’s L1 and L2 mirror unit numbers,
and click OK.
The pair topology is modified.
For more information about changing a pair’s topology, see “Creating L1 and L2 pairs
with different topologies” (page 40) .
•
(Optional) Change the pair options.
For more information about changing pair options, see “Changing BC pair options”
(page 44) .
•
(Optional) To remove an unwanted LDEV or pair from the Selected Pairs table, select the
line for the LDEV or pair you want to remove and click Remove.
The pair’s topology is refined.
BC pair creation 39