HP XP Racks - Manual (Page 106)

Description Item
Values:
•
BC Used: The CG is in use by BC/SS.
• BC Z Used (PPRC/BCM): BC Z is using the CG and you are using BCM or
IBM PPRC to manage the CG.
•
FS Used: FS is using the CG.
• Free: The CG is not being used and is not reserved.
•
(Changing...): The status is the process of changing.
The number of pairs assigned to the CG. Number of Pairs
Pairs table
The Pairs table shows pairs with P-VOL and/or S-VOL allocated to you.
The following table shows the items in this table.
Description Item
The P-VOL information. Primary Volume
Values:
•
LDEV ID: The P-VOL’s LDEV identifier.
• LDEV Name: The P-VOL’s LDEV name.
•
Emulation Type: The P-VOL’s emulation type.
Values: OPEN-V
•
Capacity: The P-VOL’s volume capacity.
•
CLPR: The P-VOL’s CLPR number.
• Virtual Storage Machine: The model type and serial number of the virtual
storage machine to which the P-VOL belongs.
•
Virtual LDEV ID: The identification number of the P-VOL’s virtual LDEV. If no
virtual LDEV ID is assigned, a blank displays.
• Virtual Device Name: The name of the P-VOL’s virtual device, in a combined
format of “virtual emulation type”, “number of virtual LUSE volumes”, and
“virtual CVS attribute”. Each of these three items displays only if it is specified.
If none of them are specified, a blank displays.
•
Virtual SSID: The virtual SSID of the P-VOL. If no virtual SSID is specified, a
blank displays.
The pair type. Copy Type
Values:
• BC-L1: BC/SS L1
•
BC-L2: BC/SS L2
•
FS: FS
• BC Z: BC Z
The status for the pair. Status
For more information about pair status, see “The RWC pair status names and
descriptions” (page 63) .
The S-VOL information. Secondary Volume
Values:
•
LDEV ID: The S-VOL’s LDEV identifier.
• LDEV Name: The S-VOL’s LDEV name.
106 Business Copy GUI reference