HP Switch SFP Modules - Manual (Page 87)

Managing Ports
Viewing and Configuring Ports
59273-00 C 77
Internal Port Operational States
The operational states on the internal ports in the faceplate display are described
in
Table 3-19 .
Table 3-19. Internal Port Operational States
State Description
Logged In — DCBX enabled. The Port SyncStatus has been acquired,
and Port Link State is "Active".
Logged In—DCBX not enabled
Down—Both sides always red if the Port's operational State is "Down"
Testing (Diagnostics)—Always displayed for internal ports if Opera-
tion State is "Diagnostic" or "Test"
Other—DCBX enabled. The Port SyncStatus has been acquired, and
Port Link State is "Active".
Other—DCBX enabled. The Port SyncStatus has been acquired, but
Port Link State is NOT Active.
Other—One of the following:
 DCBX enabled. The Port SyncStatus is NOT Acquired
 DCBX not enabled, or any other case not above.