HP Switch SFP Modules - Manual (Page 49)

Managing H3C LSW1FC4P0 Interface Card
Configuring an H3C LSW1FC4P0 Interface Card
59273-00 C 39
Configuring SNMP
Configuring the Simple Network Management Protocol includes:
 SNMP Properties Configuration
 SNMP Trap Configuration
 SNMP v3 Manager and User Configuration
SNMP Properties
Use the SNMP Properties dialog ( Figure 2-22 ) to change SNMP configuration
parameters. After making changes, click the OK button to put the new values into
effect. To open the SNMP Properties dialog, choose one of the following:
 Open the faceplate display for the H3C LSW1FC4P0 Interface Card that you
are configuring. Open the Switch menu, select SNMP, and select SNMP
Properties.

Right-click an H3C LSW1FC4P0 Interface Card graphic in the faceplate
display, and select SNMP Properties from the popup menu.
Figure 2-22. SNMP Properties Dialog
NOTE:
Since Read Community, Trap Community, and Write Community settings are
like passwords and are write-only fields, the current settings are displayed as
asterisks.