Viewing and configuring ports – HP Switch SFP Modules User Manual
Page 84
Managing Ports
Viewing and Configuring Ports
74
59273-00 C
Viewing and Configuring Ports
Port color and text provide information about the port and its operational state. To
display port number and status information for a port, position the cursor over a
port on the faceplate display. The status information changes depending on the
View menu option selected. Green indicates active; gray indicates inactive.
Context-sensitive popup menus are displayed when you right-click a port icon in
the faceplate display. Use the drop-down lists in the Port Properties dialog to
change the following parameters:
VLAN
The VLAN for the selected port
MAC Address
N/A - does not apply to this switch
Fabric WWN
N/A - does not apply to this switch
Login Limit Exceeded
Indicates if the maximum number of logins
is reached
Media Group
Media Type
The transceiver fibre type, such as single
mode, multi-mode, copper.
Media Speed
The maximum transceiver speed
Media
The transceiver type.
Media Transmitter
The transceiver transmitter type, such as
longwave, shortwave, electrical.
Media Distance
The maximum transceiver transmission
distance
Media Vendor
The company that manufactured the SFP
Media Vendor ID
The IEEE registered company ID
Media Part Number
The part number assigned to the SFP
Media Revision
Transceiver hardware version
Table 3-17. Port Information Data Window Entries (Continued)
Entry
Description