Restore dialogs – full and selective – HP Switch SFP Modules User Manual
Page 55
Managing H3C LSW1FC4P0 Interface Card
Restoring an H3C LSW1FC4P0 Interface Card
59273-00 C
45
To restore an H3C LSW1FC4P0 Interface Card, do the following:
1.
Log in to the fabric through the H3C LSW1FC4P0 Interface Card you want
to restore. You cannot restore an H3C LSW1FC4P0 Interface Card over an
ISL.
2.
Open the Switch menu and select Restore to display the Restore dialog
(
). The Restore dialog offers a Full Restore and a Selective
Restore tab.
Figure 2-25. Restore Dialogs – Full and Selective
3.
Enter the archive file name or browse for the file. This archive file must be
one that was produced by the QuickTools archive function. Configuration
backup files created with the Config Backup command are not compatible
with the QuickTools restore function. The Config Backup command does not
archive the primary or secondary secrets for any security groups.
CAUTION!
The H3C LSW1FC4P0 Interface Card being restored should be physically
disconnected from the fabric. Restoring an H3C LSW1FC4P0 Interface Card
in a fabric can severely disrupt the fabric. After the restore process is
complete, the H3C LSW1FC4P0 Interface Card can be reconnected to the
fabric.