HP Switch SFP Modules - Manual (Page 54)

Managing H3C LSW1FC4P0 Interface Card
Archiving an H3C LSW1FC4P0 Interface Card
44 59273-00 C
Archiving an H3C LSW1FC4P0 Interface Card
You can create an .XML archive file containing the configuration parameters.
Basically any data received by QuickTools is archived. This archive file can be
used to restore the configuration on the same H3C LSW1FC4P0 Interface Card or
on a replacement H3C LSW1FC4P0 Interface Card. You can also use the archive
file as a template for configuring new H3C LSW1FC4P0 Interface Cards to add to
a fabric. Passwords are not archived. Security Group secrets are not included in
the archive and must be re-configured using the CLI after a restore.
Archived parameters include the following:
 H3C LSW1FC4P0 Interface Card properties and statistics
 IP configuration
 SNMP configuration
 Port properties and statistics
 Alarm configuration
 User account information (but not restored)
 Configured security (only with SSL connection to the H3C LSW1FC4P0
Interface Card)
 RADIUS Server information (only with SSL connection to the H3C
LSW1FC4P0 Interface Card)
To archive an H3C LSW1FC4P0 Interface Card, do the following:
1. Open the Switch menu and select Archive.
2. In the Save dialog, enter a file name.
3. Click the Save button.
Restoring an H3C LSW1FC4P0 Interface Card
Restoring an H3C LSW1FC4P0 Interface Card loads the archived H3C
LSW1FC4P0 Interface Card configuration parameters to the H3C LSW1FC4P0
Interface Card. The H3C LSW1FC4P0 Interface Card configuration must be
archived before it can be restored. The H3C LSW1FC4P0 Interface Card archive
must be compatible with the H3C LSW1FC4P0 Interface Card to be restored.
That is, you can only restore an 8-Port H3C LSW1FC4P0 Interface Card with an
archive from an 8-Port H3C LSW1FC4P0 Interface Card. Refer to
”Archiving an
H3C LSW1FC4P0 Interface Card” on page 2-44 for more information.