HP LaserJet 6L Pro Printer - Manual (Page 18)

16 Chapter 1 - Setup EN
Installing your printer software
The following section lists several different methods of installation.
Use the method most appropriate for your computer system. Make
sure that you quit all software that is currently running, such as
Microsoft
®
Office Manager, virus checkers, and fax utilities.
Standard installation for Windows 95,
Windows 98, Windows 2000, and NT 4.0
To install your printer software for Windows 95, Windows 98,
Windows 2000, or NT 4.0, refer to the following steps:
1 Insert HP LaserJet 6L Pro CD into CD drive.
Note If the installation dialog screen does not appear, click Start, then click
Run. Type your X:/Setup, replacing "X" with the letter of your CD drive,
and click OK.
2 Click the Install button.
Note HP recommends the Express install for most users.
3 Follow the instructions on your screen to complete the
installation.
4 Remove the CD when the installation is complete.
Note If the next time you restart your computer and your screen displays
"New hardware detected" and lists the HP LaserJet 6L Pro printer,
select "Do not install a driver (Windows will not prompt you again)" and
click OK.