HP XP P9000 Command View Advanced Edition Software - Manual (Page 483)

a number of different sites. These programs provide information to Replication
Manager and are called
information sources .
IP Internet Protocol
iSCSI Internet Small Computer System Interface
LAN Local Area Network
LDAP Lightweight Directory Access Protocol
LDEV (Logical
DEVice) A volume created in a storage systemknown as an LDEV (logical device) in a
mainframe system. It is a storage region created by dividing up an Array group
storage region in the
XP1024/XP128 , XP12000/10000/SVS200 and
XP24000/20000 series. The size of an LDEV is determined by the factory settings
and the size of the drives that make up the Array group. An LU is made up of
one or more LDEVs. In Replication Manager, the storage region of storage system
models other than the
XP1024/XP128 , XP12000/10000/SVS200 and
XP24000/20000 series are also called LDEVs.
LDKC Logical Disk Controller
Local Scan A volume scan that HP StorageWorks P9000 for Business Continuity Manager
Software can perform on Gen'ed volumes. The local DAT attribute is assigned
to the disk configuration definition file in which the discovered volumes are stored.
Local Device
Manager Device Manager on the management server on which Replication Manager
resides.
LU (Logical Unit) A volume created in a storage system - known as an LU (logical unit) in an open
system.
LUN (Logical Unit
Number) A management number assigned to an LU in a storage system. A LUN is a number
assigned to identify an LU for the port in the storage system to which the LU is
connected, either by the port or by the host group assigned to the port. An open
system host uses a LUN to access a particular LU.
LUSE LU Size Expansion
(XP7 mainframe
agent) Software used to acquire information about mainframe system hosts and storage
systems. In conjunction with XP7 mainframe agent, Replication Manager monitors
configuration and status information about copy pairs created using PPRC.
MCU Main Control Unit
MFA XP7 mainframe agent
MIB (Management
Information Base) A database that defines the structure of information used by SNMP. The MIB
used for Replication Manager defines the information set for alerts, such as
monitored targets, conditions, and messages.
multi-target
configuration A copy pair configuration with a one-to-many relationship between the primary
and secondary volumes. Information from one volume is copied to multiple
volumes.
NAS Network Attached Storage
NIC Network Interface Card
User Guide 483